How to Organize Your Wiring System


Going the DIY route on home projects like setting up the electrical system is excellent for folks who have prior experience. Even should be sure to do proper research before starting a project, however, and seek advice from professionals like a Fort Worth electrician. Here are some tips on organizing your home wiring systems.

Unrolling Cable Wires Smoothly

When not appropriately handled, cables can get tangled and cause issues in your wiring system. You can prevent this pesky problem by straightening the cable first before installing them to the framing. Start at the center of the roll and grab a fistful of coils. Toss the wires on the floor, then straighten the cables as you walk forward. 

Keeping Electrical Boxes Organized

When dealing with a lot of wiring, it can bunch up and make it difficult for you to pack it neatly into an electrical box. Round up the ground wires and connect them with the long pigtail. Neatly fold them and set the pile to the back of the box with the pigtail left extended. Proceed to the neutral wires in the same fashion. Arranging the cables makes it easy to identify which is which, and it also gives enough space for the switches, so nothing is popping out.

Always Make Sure the Power Is Off

This advice may seem like a no-brainer, but people sometimes forget to check that the power is off before starting work on the wiring. Always be cautious when touching any wires or handling any electrical work. Non-contact voltage detectors are a great tool to use for testing the wires you’re working with, and you can easily find them in hardware stores or by going online.   

Remove Sheathing On Cables

Before setting the wires into the electrical box, make sure you strip any cable sheathing that needs to go. Ensure that the cable isn’t stretched too tight so that you have enough legroom for some adjustments after the conductors have been installed. When removing sheathing, mark where you’ll be stripping after checking that the cable is in the right spot.

It’s best to consult your local Fort Worth electrician if you want more tips like these when going into electrical projects. Remember to properly label your wires and keep cables neatly taped, so you end up with an organized home wiring system.